Heating equipment compartment
Heating components are housed in a side compartment, away from the tank body.
Bitumen grade and temperature
Tell us the grade and the loading temperature so we can size insulation and heating.
- Início
- Sobre
- Catálogo
-
Produtos
-
Transporte de contentores e granéis
Semirreboque Flatbed Semirreboque de vedação Semirreboque com cortina lateral Esqueleto Trailer Reboque porta-veículos -
Transporte de líquidos e pós
Reboque cisterna de alumínio Navio cisterna de cimento a granel Reboque para camião-cisterna Reboque cisterna em aço inoxidável Reboques cisterna de asfalto para venda -
Transporte de máquinas e equipamentos
Reboque de pescoço de ganso dobrável Semi reboque rebaixado Reboque rebaixado de vários eixos Reboque de pescoço de ganso amovível -
Transporte de areia e carvão
Semi reboque de parede lateral Semirreboque basculante -
Camião＆Reboques especiais
Camiões HOWO Camiões FAW Camiões Foton Camiões SHACMAN Camiões Foton Camiões Dongfeng Peças para reboques
-
- Solução
- Caso
- Visite Chenlu
- Conhecimento
- Apoio
- Contacto
Obter um orçamento
Hot bitumen transport
40 m³ Bitumen Tanker Trailer with Insulated 4-Compartment Tank
This 40 m³ tanker carries hot bitumen and asphalt in an insulated, clad four-compartment tank on a three-axle chassis. Heating and auxiliary equipment sit in a separate side area, and the rear valve takes a discharge hose at the job site.
- Volume do depósito
- 40 m³
- Compartimentos
- 4
- Eixos
- 3, 1,310 mm apart
- Comprimento total
- 11,220 mm
Preço: direto de fábrica, cotação sob consulta
Garantia: 2 anos
Insulation and heating set to your route
Descrição do produto
Insulated Four-Compartment Tank, Side Heating Equipment, Rear Valve
The 40 m³ tank is divided into four compartments and wrapped in insulation under external cladding to slow heat loss between the loading point and the job site. Heating and auxiliary equipment is mounted outside the tank in a dedicated side area, where the service points are easy to check. A handwheel valve at the rear connects to the discharge hose. A top walkway with guardrail gives access to the manholes. Tank material, insulation thickness, heating equipment and valve size are chosen for your bitumen grade, loading temperature and journey time.
-
40 m³, 4 compartments
-
Insulated and clad tank
-
Heating set to your route
| Tipo | 3 axle insulated bitumen (asphalt) tanker semi trailer |
| Carga | Asphalt or bitumen |
| Tank capacity | 40 m³ |
| Compartimentos | 4 |
| Tank exterior | Insulated body with external cladding |
| Overall size (L x W x H) | 11,220 x 2,500 x 3,650 mm |
| Chassis reference height | 1,090 mm |
| Eixos | 3 |
| Kingpin to first axle | 6,450 mm |
| Espaçamento entre eixos | 1,310 mm |
| Front / rear overhang | 1,000 mm / 1,150 mm |
| Acesso | Top walkway with guardrail, ladder |
| Discharge | Rear outlet with handwheel valve |
| Selected per order | Tank material, insulation thickness, heating, valve size, axle rating, suspension, tyres |
| Garantia | 2 anos |
Heat and equipment
Heating and Auxiliary Equipment Area
Equipment sits outside the tank in a dedicated side area for routine checks.
Auxiliary equipment
The auxiliary unit sits with the other service points so they can be checked together.
Grouped service points
Equipment and pipework are grouped in one area along the chassis.
Discharge and chassis
Rear Discharge and Three-Axle Chassis
Discharge at the rear; three axles at 1,310 mm centres.
Rear handwheel valve
The outlet and handwheel valve sit at the rear, ready for the discharge hose.
Outlet fittings
Valve and hose sizes are matched to the receiving equipment at the unloading site.
Three-axle group
Kingpin to first axle 6,450 mm; axle rating, suspension and tyres are chosen for the order.
Dimensões
40 m³ Bitumen Tanker Dimensions
Main dimensions in millimetres for route and yard planning.
- Comprimento total
- 11,220 mm (36 ft 10 in)
- Largura total
- 2,500 mm (8 ft 2 in)
- Altura total
- 3,650 mm (12 ft)
- Tank capacity
- 40 m³ (10,567 US gal)
- Chassis reference height
- 1,090 mm
- Kingpin to first axle
- 6,450 mm
- Espaçamento entre eixos
- 1,310 mm
- Front / rear overhang
- 1,000 / 1,150 mm
Tank material, insulation thickness, heating equipment, valve size, axle rating, suspension and tyres are selected for the confirmed order.
Vídeo
Assista no YouTube ↗40 m³ Bitumen Tanker Walkaround
A finished tanker from several angles: the four-compartment tank and cladding, top walkway, three-axle running gear, side equipment and rear discharge.
Configure the Tanker for Your Bitumen and Route
Three details we need before quoting
Hot bitumen loses heat on every kilometre. These details set insulation and heating.
How is this bitumen tanker built?
Six Stages from Tank Layout to Final Checks
The tank, four compartments, three-axle group and equipment positions are laid out first. Tank plates and end sections are then cut and formed, with compartment plates, access openings and outlets prepared together. The shell, ends and internal compartments are assembled with the manholes, supports and discharge points. Insulation goes around the tank and is covered with external cladding. The frame, landing gear, axles, walkway, equipment boxes, heating parts and discharge pipework are fitted, and lights, guards, valves and connections are checked after assembly.
Opções de configuração
Axle, Suspension and Brake Options for the Bitumen Tanker
Running gear is chosen for a fully loaded hot tanker on your route. Pick brands your fleet can service locally.
01Eixo de semirreboque FUWA
Chinese axle brand; ratings matched to the loaded tanker and your axle limits.
02Eixo para semirreboque BPW
For fleets that keep BPW spares or use BPW service points.
03Eixo tipo americano
Para mercados que utilizam eixos e furações de roda no padrão americano.
04Suspensão mecânica ao estilo alemão
Leaf-spring suspension, simple to inspect and repair.
05Peças de reposição da suspensão
Springs, hangers and wear parts can ship with the tanker as a spare-parts kit.
06Válvula de freio WABCO
Brake valve option for fleets that standardise on WABCO air-brake parts; ask about ABS.
Por que confiar na CHENLU
Fabricado em nossa própria fábrica, comprovado por fatos verificáveis
Your tanker is formed, welded, insulated and checked in our own factory.
Desde 2008
Fabrico direto de fábrica
Nossa própria unidade de fabricação em Heze, Shandong: 60.000 m² de oficinas e mais de 300 trabalhadores e engenheiros.
ISO 9001 + CCC
Sistema de qualidade certificado
Gestão de qualidade ISO 9001:2015 e Certificação Obrigatória da China, com 32 patentes nacionais (21 concedidas).
10–30 dias
Fabricado conforme o seu projeto
As encomendas personalizadas normalmente levam de 10 a 30 dias após o pagamento do sinal, com atualizações por foto e vídeo. A inspeção antes do envio é bem-vinda.
Garantia de 2 anos
Suporte pós-venda
Peças de reposição, manuais de operação e orientações de manutenção para os semirreboques que fabricamos.
Visitas de clientes
Meet the Factory That Builds Your Tanker
Buyers from Africa, the Americas, the Middle East, Asia and Australia have visited CHENLU before confirming their orders. Click any photo to see more visits or plan your own.
Clientes da Costa Rica visitam a fábrica para conhecer os semirreboques de plataforma baixa e basculantes de alto desempenho
Cliente dos Emirados Árabes Unidos visita a nossa fábrica
Clientes africanos ficam impressionados com as soluções de semirreboques basculantes para cargas pesadas da CHENLU
Cliente do Togo em visita à fábrica de semirreboques CHENLU
Cliente de Burkina Faso na fábrica CHENLU
Parceiro comercial brasileiro visitando a fábrica da CHENLU
Cliente do Paquistão avaliando reboques na CHENLU
Cliente australiano visitando a fábrica de semirreboques da CHENLUVisite a CHENLUPlaneje sua visita à fábrica da CHENLUPerguntas frequentes
Bitumen Tanker Trailer FAQ
01What is the capacity of this bitumen tanker?
40 m³ (about 10,567 US gallons), split into four compartments. The payload you can carry depends on the bitumen density and the weight limits on your route.
02How does the tanker keep bitumen hot?
The tank is insulated and covered with external cladding to slow heat loss, and heating equipment is mounted in a side compartment. Insulation thickness and heating are chosen for your grade, loading temperature and journey time.
03What are the dimensions?
11,220 mm long, 2,500 mm wide and 3,650 mm high, on three axles spaced 1,310 mm apart.
04How is bitumen unloaded?
Through the rear outlet and handwheel valve, which connects to a discharge hose. Valve and hose sizes are matched to your receiving equipment.
05Can it carry asphalt emulsion or other liquids?
It is built for asphalt and bitumen. Tell us any other cargo before ordering so the tank material, heating and valves can be checked for it.
06What do you need for a quote?
Bitumen grade, loading temperature, route and journey time, unloading method, destination and quantity.
Alguma dúvida? Entre em contacto connosco!
Está a ter problemas? Precisa de ajuda adicional?
-
-
Descarregar a nossa brochura de amostra
-
Ver Centro de Conhecimento
Explore mais dos nossos produtos
Oferecemos serviços totalmente personalizados para responder aos requisitos exclusivos dos nossos clientes, garantindo que cada produto proporciona um desempenho e fiabilidade.
Obter um orçamento
Responder-lhe-emos no prazo de 24 horas. Em caso de urgência, adicionar WhatsApp/WeChat: 86-15628801159,. Ou ligue diretamente para 86-15628801159.
*Respeitamos a sua confidencialidade e todas as informações são protegidas.
Apenas utilizaremos as suas informações para responder ao seu pedido e nunca enviaremos mensagens de correio eletrónico ou mensagens promocionais não solicitadas.